•
Remove the plug from the power outlet and wait until the appliance is sufficiently
cooled off before cleaning.
•
Keep out of reach of children. In order to keep children from the dangers of electrical
appliances, never leave them unsupervised with the machine.
•
The appliance must only be mounted by an authorized specialist, paying attention to
the relevant regulations of the power supply companies and the regional construction
regulations.
Save These Instructions
Operation Instruction
•
Remove all package material (including anti-vibration object of the lamp) and check
the appliance, supply cord and the plug for signs of damage.
•
Pay attention to the mounting place and all mounting material(dowels, screws).
Ensure they are suitable and stable enough for mounting and lastingly holding of the
appliance.
•
Before mounting, the minimum safe mounting distances and tilt angles shown in the
figures must be strictly followed.
•
The distance between the bottom edge of the appliance and the floor must be at
least 1.8 M. See figure 2.
•
There must be a distance of at least 0.4 M between the appliance and the ceilings,
roofs or other covers. See figure 2.
•
There must be a distance of at least 0.5 M at each side between the appliance and
walls. See figure 2.
•
Please note that, the installation of the appliance must not be exposed to adverse
weather conditions.
•
Fix the mounting bracket on the wall first. Ensure that the place to be installed is
secure and firm. Or connect the appliance to the stand.
•
Adjust the desired angle of radiation and fasten all screws. Check regularly the
screws’ connection. Mechanical bearing pressure and oscillation due to wind or rain
could become loose.
•
Plug in the power source and operate the remote control. Please ensure that the
heater operates in the first 10-15 minutes the appliance works trouble-free.
Figure1: Mounting bracket (wall bracket), anchor dowels or chains provided. Connection from the
ceiling or wall to the infrared heater.
Figure2: Min. distance to floor, ceiling and wall
Receiving angle and control distance
Figure 3: Tilt angle
Top and bottom Angle adjustment
Left and right Angle adjustment
