Heat & Glo • TiaraE• 4035-822 Rev F • 01/05
8
5
Operating Instructions
The operating controls are located on the back of the appli-
ance.
A. Main Power Switch
• When the main power switch is turned on, it provides
power to all functions.
•
When used in conjunction with RC-ELEC-HNG the switch
should remain in the “ON” position.
B. Intensity Switch
• Controls the intensity of the ember bed and flame.
C. Heater Switch
• The heater switch provides power to the heater system.
• The RC-ELEC-HNG remote control does not control this
function.
D. Thermostat
• The thermostat allows you to adjust to the desired room
temperature.
• To adjust the thermostat, turn the control knob clockwise
all the way, then turn the knob counterclockwise until you
hear a click.
• To increase the desired temperature, turn the knob
clockwise.
• To decrease the desired temperature, turn the knob
counterclockwise.