1
REFRACTORY, GRATE and
LOG PLACEMENT INSTRUCTIONS
492-925-D 1/99
Models:
CFX-36T
&
CFX-DA
1 2 3 4 5 6
MAKE SURE THE GRATE IS ON THE
SMALL BACK BEND TABS.
REFRACTORY AND GRATE:
To place the refractory into the
unit first make sure the bend up
tabs are all at 90° angles. Place
the refractory on the four largest
bend tabs.
The refractory should sit against
the front surround of the unit
and under the smaller back
tab(s). See Figure 1.
The grate is now placed onto
the refractory with the back legs
resting inside the location tab(s).
See Figure 2.
If this is not done the unit will not
function properly. The grate
should look centered in the unit
and on the refractory.
Figure 1.
Figure 2.
LOG PLACEMENT:
NOTE
: Carefully remove logs from
the cardboard used in shipment.
Use caution, fiber logs are ex-
tremely fragile.
FRONT VIEW
OVERHEAD
VIEW
