Instructions for Use: SST Pump & Hose
Brand Name of Product
SST Pump & Hose
Generic Name of Product
SST Pump & Hose
Product Code Number(s)
IP579-4
Purpose of Product
To drain SST Trays from fluids
Range of Applications for Product
SST Trays and/or draining of any other items that require solution evacuation.
Key Specifications of Product
•
Stainless Steel Pump
•
Hose
Shipping & Storage
Shipping Conditions & Requirements
Storage Conditions
Packaging Contents
Shelf Life
Instructions for Using Product
Description of Use (s)
Preparation for Use
In any installations where property damage and/or personal
injury might result from an inoperative or leaking pump due to power outages,
discharge line blockage, or any other reason, a backup system(s)
should be used. In order to safely use this product, familiarize yourself
with this pump and also with the liquid (chemical, etc.) that is going to be
pumped through the unit. This pump is not suitable for many liquids.
Diagrams (drawings, pictures)
Steps for Use of Product
Installation
1. Pump should be placed as close to source of liquid and power as possible, not
more than 7' above liquid source and not more than 25' from power source.
2. Use reinforced plastic or fabric tubing or metal pipe for the suction side of
the pump. This will prevent collapse of the suction piping. Discharge piping
should never be larger than suction piping!
3. Attach suction line piping to the suction inlet and discharge line piping to
the discharge outlet.
4. Avoid using looped sections of pipe that might permit air to become entrapped.
5. Piping should be checked for any leaks at the connections. Small leaks in
suction line greatly reduce efficiency of pump and may prevent priming.
Pump should be permanently mounted; never operate a pump unless it is
secured to a solid foundation.
6. Do not operate pump dry. Impeller and mechanical seal damage will result.
7. Protect pump from extreme heat, cold. and humidity. This unit is not
waterproof and is not intended to be used in showers, saunas, or other
potentially wet locations.
8. The motor is designed to be used in a clean, dry location with access to
an adequate supply of cooling air. Ambient temperature around the motor
should not exceed 104°F (40°C). For outdoor installations, motor must be
protected by a cover that does not block airflow to and around the motor.
This unit is not weatherproof, nor is it able to be submersed in water or any
other liquid. Do not use in or near swimming pool or spa.
9. Install a foot valve and prime pump when suction lift is over 6' or when suction
