3
•
DO NOT attempt to open the pre-sealed actuator or obtain local service, for it will VOID
the warranty and might result in damage. Consult your dealer or manufacturer for further
information.
WHEN USING RAILS OR ASSIST BARS:
•
Before operating, ensure that the bed rails/bars are assembled and installed correctly as
instructed.
•
DO NOT apply side pressure to the bed rails/bars. This could deform or break the bed
rails. This could result in personal injury and damage to the bed rails.
•
DO NOT use the bed rails/bar as a push handle for moving the bed. This could deform or
break the bed rails.
•
DO NOT use the bed rails/bar if proper installation cannot be achieved. Contact your
dealer or manufacturer.
DECLARIATION
–
ELECTROMAGNETIC EMSSIONS
The B420 medical bed is intended for use in the electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the B420 medical bed
can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the B420 medical bed
and according to the maximum output power of the communications equipment.
Special considerations should be given to proximity of B420 medical bed and patients who
have a cardiac pacemaker, implanted defibrillator, or other implanted metallic or electronic
device, because this may cause electrical interference, or death.
Interference to electronic equipment may occur in the vicinity of devices marked with this
symbol:
