SS-650
INSTRUCTION MANUAL
How Does It Work
Introduction
Names of the Components
Battery cover (AAA x 1)
Self-adhesive elec-
trode pads
ON/OFF switch / inten-
sity level volume
LED indicator
Detector
Test button
I. Loading the Battery
Please remove the insulation strip before using the
Snore•Stopper for the first time.(as shown in picture I)
1. Open the battery cover with the screwdriver (included) to
load AAA battery. Make sure that the
AAA + pole is placed towards “ON/
OFF switch / intensity level volume”
(as shown in picture II)
2. Close the battery cover and secure it
with the screw.
Operating the Device
II. Sticking On the Electrode Pads
1. Use the moist alcohol swab to clean the two black conductive rubber pads on the
back of the device.(as shown in picture III)
2. Remove the self-adhesive electrode pads from their vacuum pack. Peel off the
printed side of the plastic film.(as shown in picture IV, V)
3. Attach the side with printed words on the waxed protective film to the electrode
pads onto the black conductive rubber pads. Press the electrode pads in a motion
to ensure better adhesion, and wait for fifteen minutes (as shown in picture VI, VII).
III. Adjusting the Wrist-Band
Peel off the outside plastic film from the Electrode. (as shown in picture VIII)
Wear the Snore Stopper one inch below the wrist like a normal watch. Hook the belt
into the other “wing” of the Snore Stopper and make sure the hook is completely
locked. Don’t pull the belt too tightly as it may result in poor blood circulation.
I
II
III
VII
IV
V
VI
II
I
III
VIII
IV. Testing and Using the Snore Stopper watch
When you wear Snore Stopper one inch below the wrist, the LED normally
changes from “red” to “green”, meaning the device has proper contact
with your skin.
If the LED still shows a red light, means the Snore Stopper does not have
proper contact with your skin. Adjust the wrist belt until the LED indicator
light is green. Or some time battery may be flat, please change it. Turn
the Snore Stopper “ON” by turning the Intensity adjustment knob to level
1.Check that LED is green and blinking. Press the TEST button three times
in a row. The Snore Stopper watch will emit weak electrical impulse for 5
second.
This means Snore Stopper watch is ready for use. Adjust the intensity level
between 4 to 7 and start using the device.
Note
: Due to variations in skin sensitivity, sometime you may not feel
the electrical impulse. Wear the snore stopper inner side of the wrist and
press the test button 3 times again.
Our device’s patented intelligent design can automatically detect snores
above 55 dB when there are no other background loud noises.
Now you can stop the annoying snores and have better quality sleeps in
the future.
V. After Use
In the morning, after you remove the device, please stick
the plastic film back onto the electrode pads to prevent
the contamination and to increase the life span of the
electrodes. In order to maximize the battery life, this
device will automatically switch off after 8 hours. But
it is advisable to turn off the power manually after you
wake up.
Thank you for buying Health Vision’siSnore•Stopper. We are sure that our Snore Stop
-
per will help to improve your day to day life.
A good night sleep is essential for a healthier lifestyle especially in stressful times.
Please read the manual carefully to learn how to operate the unit correctly. A
complete and thorough understanding of the process outlined in the manual will give
you, as the user, a rewarding and lasting benefit of the Snore•Stop watch.
Snoring is linked to many leading health issues in today’s world including:
- Increased drowsiness;
- Increased risk of heart disease, stroke, fatigue and depression;
- Increased risk of high blood pressure;
- Increase the risk of heart disease, stroke, fatigue, and depression, etc.
Let’s not forget our beloved partners who also suffer when you snore.
Normally when we sleep, our muscles gets relaxed. Snoring is a common condi
-
tion that can affect anyone although it occurs more in men and people who are
overweight which worsens with age. Snoring occurs when the flow of air through the
nose or mouth becomes physically obstructed. A combination of factors can prevent
normal airflow including allergies. Most common factor of this obstruction is when
the tongue and throat muscles become too relaxed and they fall back into the airway
of the nose or mouth. Generally, snoring can be reduced if the snorer changes his/
her sleeping position which most often happens when given a slight nudge by their
partner!
Based on this concept, Snore•Stopper has been developed to reduce snoring by a
biofeedback process. When snores are detected, the device generates a 5 second
impulse onto superficial skin. Snoring may then be reduced in the following ways:
1) The snoring person changes his/her sleeping position; or
2) Muscle tension in the throat is increased by the gentle massage wave, bringing
those throat muscles back to their normal position.
Snore•Stopper provides a safe and intelligent alternative to reduce your snoring.
Give yourself (and your loved ones!) the gift of a great quality sleep!
Use only as directed. If any unusual symptoms appear, discontinue the use immedi
-
ately and consult your physician.
1
