11
TROUBLE SHOOTING
TROUBLE SHOOTING GUIDE
SYMPTO M
CAUSE
SOLUTION
Cons ol e di sp lay LCD 's
do not illum inat e
a. No power to tread mill
b. Cons ol e wire co nne ct or not
co nne ct ed or inc om pl et el y
co nne ct ed
c. Ove rload pr ot ec tion is ac tiva ted
Check the on-off switch
Turn off, then turn on power.
Push START,
Check all of connected wires,
if still not illuminated, a service
is required
Scr am bl ed di gi tal is on
co ns ol e LCD
Show E1
Dam age d co ns ol e
a. RPM se ns or pr obl em
b. Senor wire not co nne ct to
co nt rol ler or impr ope r co nne ct ion
c. Mot or wire not co nne ct ed
d. Cons ol e wires not co nne ct pr ope rly
e. Cont rol ler dam age d
f. Ove rload pr ot ec tion is ac tiva ted
Service required
Service required
Check the lubrication, running
belt tension, turn off, then
turn on power
The most happened symptom is current overload protection. And show E1(error
1) on monitor. E1 is to inform the runner to examine your treadmill by yourself to
avoid the damage happened on treadmill. The runner can follow the below steps
to do the examination.
1). E1 would be happened by electricity system at your home. Sudden big current
would cause E1. Please turn off the on-off switch, then turn on the switch to
resume the using.
If it still happened, the most reason is too much friction between the running belt
and the running deck.
2). Please do lubrication according to LUBRICATION MAINTENANCE
instructions. Enough lubrication will improve the performance and maximum
the treadmill life.
3). Keep clean under running belt.
4). check the tension between roller and running belt. (please see BELT
ADJUSTMENT)
5). The damaged running belt will increase the current and be easy to cause E1.
Wear proper footwear while using. It can avoid to damage the running belt.
If still can not solve it, please call your dealer for helps.
Summary of Contents for HM-T3200
Page 1: ......