TM 55-1945-205-24-3-3
Test Equipment:
Lists all test equipment (standard or special) required to troubleshoot, test and inspect the
equipment covered in this manual. The test equipment is identified with an item number and work package
number from the
Tool Identification List
located in Chapter 4,
Supporting Information
.
Tools:
Lists all tools (standard or special) required to perform the task. Tools are identified with an item number
and work package number from the
Tool Identification List
located in Chapter 4,
Supporting Information
.
Personnel Required:
Lists all personnel necessary to perform the task.
Equipment Condition:
Notes the conditions that must exist before starting the task. The equipment condition
will also include any prerequisite maintenance tasks to be performed with reference to the work package number
or to the TM number.
References:
Includes any other manuals necessary to complete the task. When there are no references listed, all
steps necessary to complete the task are contained within this manual. A listing of reference materials is
contained in the work package
References
in Chapter 4,
Supporting Information
.
Maintenance Instructions
To locate a maintenance procedure, open the manual to the Table of Contents located in the front of this manual. Find
Chapter 3,
Maintenance Instructions.
Look down the list and find the maintenance procedure to be accomplished. On
the right side of the maintenance procedure will be a work package number. Turn to the work package indicated.
Before beginning the maintenance task, look through the procedure to familiarize yourself with the entire
maintenance procedure. At the top of the task you will have a section called INITIAL SETUP. There are five basic
headings listed under INITIAL SETUP.
Tools:
Lists all tools (standard or special) required to perform the task. Tools are identified with an item number
and work package number from the
Tool Identification List
located in Chapter 4,
Supporting Information
.
Materials/Parts:
Lists all parts or materials necessary to perform the task. Expendable and durables are
identified with an item number from the applicable work package located in Chapter 4,
Supporting Information
.
Personnel Required:
Lists all personnel necessary to perform the task.
References:
Includes any other manuals necessary to complete the task. When there are no references listed, all
steps necessary to complete the task are contained within this manual. A listing of reference materials is
contained in the work package
References
in Chapter 4,
Supporting Information
.
Equipment Condition:
Notes the conditions that must exist before starting the task. The equipment condition
will also include any prerequisite maintenance tasks to be performed with reference to the work package number
or to the TM number.
Test Equipment:
Lists all test equipment (standard or special) required to troubleshoot, test and inspect the
equipment covered in this manual. The test equipment is identified with an item number and work package
number from the
Tool Identification List
located in Chapter 4,
Supporting Information
.
Repair Parts and Special Tools List
Refer to TM 55-1945-205-24P-3 when requisitioning parts, special tools and equipment.
Identify the mandatory repair parts required to perform this task listed at the top of the work package in the INITIAL
SETUP. Using the part number provided, refer to the part number index work package in TM 55-1945-205-24P-3.
Look up the part number in the part number column and identify the figure and item number where the part is located.
Turn to the figure and locate the item number listed. Verify that the item is correct.
iv
