head rush technologies TRUBLUE iQ, Operator'S Manual

Page: 21 / 48

The Side Covers are a sacrificial protective cover designed to prevent damage to
both the device and any adjacent surface. Should the Covers become excessively
worn, damaged, or aesthetically unpleasing, they may be replaced by the Owner/
operator. Details of replacement parts may be found in the Replacement Parts
section of this Manual.
For improved life of the plastic covers, the rounded plastic cover with the gray
sash should be facing away from the climbing/descent wall. The flat plastic cover
should be facing the wall. The flat plastic cover has been designed specifically to
be more durable for impacts with the climbing/descent wall surface caused by
natural movements of the Auto Belay while users are attached to the Auto Belay.
Install the Auto Belay by using the central mounting point, as shown below,
with a longer, non-loaded secondary mount utilizing the offset mount or
handle mounting points. Only use the central mounting point as shown. Ensure
mounting hardware is secure and the unit is free to pivot in all directions.
The TRUBLUE iQ has a plastic mounting insert which is inserted through the
primary mount attachment point. The mounting connector or carabiner should
always be used with the plastic mounting insert during installation. This plastic
mounting insert is designed to protect the aluminum mounting point from
deformation due to swinging and movement of the Auto Belay during use. If
your mounting insert becomes broken or lost, replacement mounting inserts are
available from Head Rush Technologies.
Other mounting options are available. Contact Head Rush Technologies for more
information.
SECONDARY MOUNT
(Unloaded)
PRIMARY MOUNT
8.2.7 ORIENTATION
Always mount the Auto Belay with the covers parallel to the face of the climbing
wall. Mounting in this direction will allow the Auto Belay to swing laterally and
minimize the wear on the webbing line, Nozzle assembly and mounting points.
PLASTIC MOUNTING
INSERT
21
www.headrushtech.com | +1-720-565-6885