head rush technologies TRUBLUE iQ, Operator'S Manual

Page: 18 / 48

8.0 INSTALLATION
8.1 Precautions
ALWAYS USE DESIGNATED MOUNTING POINTS
Never install the Auto Belay using any part of the device apart from the designated
mounting points. Incorrect mounting can result in serious injury or death.
ALWAYS USE THE CORRECT MOUNTING HEIGHT
Failure to install the device at the correct mounting height could result in
damage to the device or loss in device performance.
HARD IMPACTS MAY RESULT IN STRUCTURAL DAMAGE
Dropping of, or hard impacts to, the Auto Belay can result in serious damage
to mounting points and internal parts and may compromise safety of
operation. If the Auto Belay is subject to a hard impact, remove it from duty
and return to a service agent for inspection.
HEAVY ITEM - TBIQ-LT: 15.9KG (35LBS)
TBIQ-XL: 19.0KG (41LBS)
Take care when lifting the Auto Belay. Take care not to drop the device as this
may result in serious injury or equipment damage.
ALWAYS MOUNT VERTICALLY
Always mount the Auto Belay vertically with the Nozzle pointing downwards
and the line exiting the bottom of the device. Failure to do so will result in
incorrect operation and compromise User safety.
HARMFUL CONTACT
Do not allow solvents, acids, sharp edges etc. to get into contact with the
device, especially the webbing. If this occurs, the Auto Belay must be inspected.
8.2 Standards
Prior to installation, all Operators must be familiar with the requirements of all
relevant Standards for anchor points, hardware, and equipment used with the
Auto Belay.
8.2.1 ANCHOR POINTS
All anchor points and connectors used with a TRUBLUE iQ Auto Belay must
conform to any federal or state requirements for such devices.
18
www.headrushtech.com | +1-720-565-6885