OPERATION:
1. Before plugging in, check that the
voltage on the rating label corresponds
to the local mains voltage.
2. Insert power plug into an electrical
outlet, ensuring that the plug matches
the socket.
3. Once the styling process is complete,
power off your appliance, unplug it, and
allow it to cool prior to storage.
4. Never use this appliance near water
where it can fall or be pulled into a tub,
basin, or shower.
5. Do not block the inlet and/or the output
of the airflow. If the intake or output is
blocked, the appliance may overheat
and malfunction.
6. Safety precautions included, but not
limited to those stated herein, should
be observed at all times while the
appliance is in use, especially if the
appliance is used around children.
7. Do not disassemble the product.
8. Do not use on anything other than
human hair.
9. Do not allow hair to enter the inlet.
10. Do not use near combustable
materials such as blankets or paper.
11. During the initial use, an odor may
occur in the heat wire but will gradually
disappear after several uses.
12. Do not forcibly pull the power cord or
wrap the cord around the appliance. It
is recommended that the AC cord be
periodically inspected.
13. Do not use any other electric heater
simultaneously in the same outlet. This
may increase risk of malfunction due to
overheating.
Commitment Issues
Interchangeable Hair Brush
PRODUCT PROFILE:
- 110V/900W single voltage
- RPM wind speed 10,500/S
- Three heat settings, Two speed settings
Low = 140F low heat, high speed
Middle = 230F medium heat, low speed
High = 284F high heat, high speed
- Emits negative ions for shiny, frizz free hair
- 360 degree swivel power cord and
ergonomic design for ease of use
- Indirect heat for less damage
- Suitable for all hair types
- Includes five different brush head units
designed to straighten, curl, and style
- Add body, volume, movement, and texture
- Achieve the perfect blowout with air flow
powerful enough to dry and style hair
INSTRUCTIONS FOR USE:
1. Gently towel dry hair to remove excess
water. Use a heat protectant to help
minimize damage.
2. After gently towel drying hair, select
your preferred brush head and insert
into the base. Twist to lock.
3. Begin drying/styling, being careful not
to concentrate airflow on any one area
for extended periods of time.
4. After styling/drying hair, apply product
if desired.
Be careful not to touch the nozzle or brush
head when in use or immediately after use
until the appliance has cooled down.
5. To remove a brush head, wait until it
cools, press the button at the top of the
base that says “PUSH”, twist to unlock.
WARNING: DO NOT USE THE LARGE
ROUND BOAR BRISTLE BRUSH HEAD
UNTIL YOUR HAIR IS 80% DRY.
CARE:
- Brush heads may be washed using soap
and water. Do not use harsh products,
benzene, or paint thinner as it may
damage your appliance. DO NOT attempt
to wash brush heads while they are
attached to the base. Remove the brush
head from the base prior to cleaning.
To clean the base, wipe with a dry cloth.
- Dropping or blunt force can and will
damage the product.
-
STORING:
- Turn the appliance off and unplug from
the outlet. Allow for the appliance to cool
before storing. Store in a dry, safe place
out of the reach of children.
REMOVES CURLS,
IDEAL FOR
STRAIGHTENING
POWER SWITCH
- LOW HEAT
HIGH SPEED
- MIDDLE
HIGH HEAT
LOW SPEED
- HIGH HEAT
HIGH SPEED
PUSH BUTTON
TO CHANGE
BRUSH HEAD
TWIST TO
LOCK/UNLOCK
QUICK
BLOW DRY
ADDS TEXTURE,
VOLUME, AND
MOVEMENT WITH
SLIGHT CURL
BLOW DRIES OUTSIDE OF HAIR
USE TO ENHANCE NATURAL
CURL AND WAVE
