HE-VA Top-Strigle 10,00 m, Operating Instructions Manual

Page: 6 / 36

UK Top-Strigle 3,0 – 4,0 – 5,0 – 6,0 – 7,0 – 8,0 - 9,0 - 10,0m 4 bars 22-01-2021
5
Back to the table of contents
Technical specifications
Working
width
Tine size
Transport
width
Transport-
height
No. of
tines
HP
requirement
Weight in kg
3,00m riged
12mm 3050 1500 50 85-110 790
16mm 3050 1500 36 95-115 850
4,00m rigid
12mm 4050 1500 66 100-125 950
16mm 4050 1500 48 110-135 1050
4,00m hydr.
12mm 1500 2100 66 100-125 1370
16mm 1500 2100 48 110-135 1480
5,00m hydr.
12mm 1500 2600 82 120-145 1570
16mm 1500 2600 60 130-155 1660
6,00m hydr.
12mm 1500 3100 100 140-170 1750
16mm 1500 3100 72 155-180 1850
7,00m hydr.
12mm 1500 3600 116 160-195 1950
16mm 1500 3600 84 190-230 2050
8,00m hydr.
12mm 1500 3600 132 175-225 2180
16mm 1500 3600 96 225-275 2280
Tyre pressure 3,8 bar / 55 psi
Oil pressure min. 150 bar
Hydraulic outlets 2 double acting
Quick couplings, standard Sterling type E 402
Hydraulic oil: The machine is filled with Hydro Texaco HD32
Working with the Top-Strigle
There is no standard tine angle recommended. The operator may adjust to achieve the desired results. The
following issues listed must be taken in consideration:
•
Actual settings will vary with tine wear
•
Ensure frame is leveled horizontal
•
Operate with the lift hydraulic in float position
•
For best results in stubble operate at 14 - 18 km/h, in pasture 8 - 12 km/h
•
A more aggressive tine angle will hold up straw for a longer period, allowing for a more even
distribution of residue
•
Breaking down straw is much more effective in dry conditions
•
A second pass may be required in extremely heavy straw conditions. Then work the second pass at a
30° - 45° angle to how it was worked the first time
•
To prevent tine damage, avoid tight turning