HE-VA Disc-Roller Contour, Operating Instructions Manual

Page: 14 / 72

Disc-Roller Contour 4,5 – 5,5 – 6,5 m 20-09-2020
14
Back to the table of contents
2
1
3
Edge equipment
The edge equipment can be adjusted
three places:
1. Loosen two bolts – move the
arm out/in.
2. Use the spindle – it raises
and lowers the disc. Loosen
two bolts – raise/lower by
the spindle and retighten the
bolts.
3. Loosen one bolt – tilt the
disc more or less.
Edge equipment for Disc-Roller
Contour
The disc can be adjusted so that
excavated soil is collected.
Keep the disc away from the ground
to avoid bending when turning.