UK
Disc-Roller 2,5 - 3,0 – 3,5 - 4,0 m (1-section) 12/08-2014
11
Put the machine on level ground
and relieve the hydraulics, before
leaving the machine.
Transport
1.
Fold up the edge equipment over the machine.
2.
Lift the discs to the top
3.
Then lift the machine to maximum transport height.
4.
Now the machine is ready for transport.
Uncoupling, Mounted Model
1.
Put down the machine on firm ground and relieve all hydraulic hoses.
2.
Now the machine may be uncoupled.
Uncoupling, Trailed Model
1.
Lift the machine up and tilt the depth stop on the drawbar forward towards
the tractor.
2.
Now lower the machine onto firm ground.
3.
Adjust the drawbar – and wheel cylinder (red) so that the drawing bolt is
loose.
4.
Now the machine may be uncoupled.
5.
Drive the tractor a little forward and then relieve all hydraulic hoses.
Important:
Summary of Contents for Disc Roller 2,5m
