HE-VA Combi-Disc, Operating Instructions Manual

Page: 19 / 56

Combi-Disc 01/08 -2015
22
Disc
The working depth of the discs are adjusted
hydraulically too. The depth position is readable
on the scale (Pos. 1) (standard).
The sensor can be adjusted to the desired depth, where el. depth stop is mounted.
It is possible to over steer the electrical system by
turning off the switch mounted in the cabin, now the discs
can pass the sensor, thereby a deeper working depth is
achieved.
Scraper
The Combi-Disc has scrapers of
special steel among the rings on a V-
Profile roller.
To avoid unnecessary wear and to
obtain the best scraper effect it is
important to check the centring of the
scrapers every day.