Prism Pro/Multi-function Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlchina.com
19
➢
Device ID: the device ID of AC
➢
Type: to select “Scene”, “Universal Switch” or “Single Channel Control”
➢
Parameter: the contents and number of parameters depend on the selected device
type.
Figure 4-5 IR codes setting
4.3.3
Slave & Sync (Invalid for Slave)
➢
Synchronous Control (Invalid for Additional AC Page)
When several panels control the same AC, user need to set synchronized panel information
before synchronizing other panels. Prism Pro can synchronize the AC information of up to 8
panels.
Click “Slave & Sync” button in AC setting page and select “Synchronous Control” label, as
shown in Figure 4-6.
①
Enable/Disable Sync: select to enable synchronizing other panels.
②
Synchronized panel subnet ID/device ID: for example, if panel 1 is required to be
synchronized, enter the subnet ID and device ID of panel 1 in “Subnet ID” and “Device
ID”.
