Respine
Manual |
English
GeneRal infoRmation
Respine is a class 1 CE-marked medical device.
intended use
Respine is a sitting support intended to be used by people with neck
disorders. Respine is to be used in situations which requires sitting for
longer periods of time in environments where specially adapted sitting
furnitures do not exist. The product shall ease the symptoms that may
occur when sitting, for people with neck disorders.
Respine is portable and intended for use (mainly for passive sitting)
in various indoor environments e.g. on chairs in meeting facilities,
cinema and theatre auditoriums and on chairs by dining tables in home
environments. The product is not intended for use in vehicles or in other
means of transportation.
Delivery control
• Make sure there is no visible damage to the product.
• Any transport damage must be reported immediately to the trans-
port company.
General safety
Before using Repine it is important that you read the manual.
• Always check before using Respine that it’s steady and straight leaning against the backrest of the
chair. Respine do not fit in all sitting furnitures. For example, it may be less functional on soft or
unstable furnitures. Always be alert and careful when you sit down so that Respine not overturns.
• Sitting upright is the most beneficial posture for the back and neck, but more important is to sit
variedly. Change position often. Be careful not to sit in a way that makes you tense. Sit comfortably. If
you experience that symptoms from your neck injury become worse when using Respine, stop using
Respine and consult a physiotherapist or equivalent.
• Respine is designed to be light and flexible and can therefore not be hanled roughly. Handle it with
care both during sitting, transportation, and the adjustment of the various functions.
• Be aware of the risk of pressure sore that can occur if you sit too long without changing position. If
you have loss of sensation, you should be extra vigilant when using Respine as there is a risk that you
will not notice if you get pressure sores.
• If the product is damaged or worn out, this must be fixed. Depending on the extent of damage, the
product should be taken out of service until repairs have been carried out or worn parts are replaced.
©
2011 H
ant
V
eRKSD
eS
iG
n
& R
eH
a
Bilite
Rin
GSPR
o
DUK
te
R
a
B
-
the
contents of this
man
ua
l
belongs to
Hantv
er
ksdesign & Reha
bi
liter
ingspr
odu
kter
a
B.
a
ll cop
ying is pr
ohi
bi
ted.
Weight: 850 g
Dimensions,
folded: 8 x 28 x 51 cm
Components in the product packaging
Neck support
Backrest
Bag
