©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
32
13 Maintenance and Care
13
Maintenance and Care
Electric shock hazard
Always switch off the stud feeder before starting maintenance and care
work.
Pull out the mains plug.
Never perform maintenance and service work on the VBZ while it is con-
nected to the stud welding unit.
Prior to this disconnect the VBZ from the stud welding unit.
Disconnect the air pressure supply.
Danger from insufficiently qualified operating personnel
Carry out only the work described here on your stud feeder.
Repairs may only be carried out by appropriately qualified personnel.
Inform your dealer or your maintenance department.
13.1 Cleaning
When needed clean the casing of your automatic stud feeder with a humid wash-
cloth.
Do not use solvents for cleaning.
These may damage the used plastic components.
Summary of Contents for VBZ-3
Page 39: ......
