©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
48
12 Welding
12.5 Performing the Welding Process
First set the necessary welding parameters.
Read and observe here point
12.4.1 „Setting the Welding Parameters“
.
Electric shock and electric arc hazard
Never touch the welding elements, chuck, retaining nut or electrically con-
ductive parts in their vicinity during the welding process.
These parts are live.
Never wear metal jewellery, even a wristwatch, on your body during the
welding process.
This will help to avoid injuries and damage due to electric power or electro-
magnetic fields.
Electric shock and electric arc hazard
Stand on an insulated mat if you have to weld under the following condi-
tions:
–
In confined spaces with electrically conductive walls
– Under cramped conditions between or against electrically conductive
parts
– Where there is limited mobility on electrically conductive parts
– In damp, wet or hot rooms.
Summary of Contents for IT 2002
Page 67: ......