HBS ACCU-TWIN 92-10-2280 Operating Manual Download Page 27 | Manualshive

Page: 27 / 50

HBS ACCU-TWIN 92-10-2280 Operating Manual Download Page 27

27

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

12 Welding

12 Welding

Charge the accumulator before using for the first time.

Read and observe here

point 11 „Connection“

.

Danger for wearers of heart pacemakers

Never operate the stud welding unit if you have a heart pacemaker.

In this case, never remain in the vicinity of the stud welding unit during

welding.

Never operate the stud welding unit if persons with heart pacemakers are

in the vicinity.

Strong

electromagnetic fields are produced in the vicinity of the stud wel

-

ding unit during welding. These fields may impair the function of the heart

pacemakers.

12.1 Switching on the Power Unit

2

1

1 - Switch
2 - External power supply unit

Only now switch on the power unit at the

mains switch (1)

at the back of the power unit.

Wait until the green welding stand-by indicator lights up.

Charge the accumulator before using for

the first time!

«
...
25
26
27
28
29
...
»

Summary of Contents for ACCU-TWIN 92-10-2280



















































Reviews:

No comments