15
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
6 Intended Use
6
Intended Use
Our stud welding unit are designed and built exclusively for industrial use. Nonindus-
trial use is expressly forbidden due to the lack of know-how about the welding tech-
nology employed and the applicable standards.
The power unit is intended exclusively for stud welding of standardised welding
elements. Any other use will result in the desired strength of the welded joint being
reduced.
The intended use also implies compliance with the intervals and conditions for ins-
pection and maintenance of the power unit and the gun employed.
The stud welding unit must be suitable for welding the welding elements in use.
Welding elements manufactured with the cold formed process have a flange and an
ignition tip. During welding, the flange prevents the arc getting to the cylindric part of
the welding element and increases simultaneously the welding area.
Summary of Contents for ACCU-TWIN 92-10-2280
Page 49: ......