©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
34
10 Preparing the Welding Head
14
13
12
18
7
Recommended tightening torques:
Tension nut (pos. 18, order no. 80-07-565):
Tightening torque: 22 Nm
Retaining nut (pos. 7, order no. 80-07-564):
Tightening torque: 14 Nm
A loose retaining nut will damage the chuck, the slot piston and the
retaining nut.
Press the trigger pin
(pos. 13)
and insert the feed tube
(pos. 14)
into the holder
(pos. 12)
. Make sure that the trigger pin springs back to the rest position; the feed
tube is then correctly inserted and secured.
You can now connect the blue air connection.
Summary of Contents for 94-31-412C
Page 61: ......