HBS 92-10-1504B Operating Manual Download Page 27 | Manualshive

Page: 27 / 62

HBS 92-10-1504B Operating Manual Download Page 27

27

©HBS Bolzenschweiss-Systeme GmbH & Co. KG

All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer

10 Preparing Workplace and Welding Process

10.2 Checking the Stud Welding Gun

Always check the operating manual of your stud welding gun to see whether it

may be used with this stud welding unit.

This stud welding unit can only be used with the HBS stud welding guns C 08,

CA 08, CI 03 and PAH-1.

Check the chuck of your stud welding gun for proper fit and ensure it is tightened.

Check the bellows of your stud welding gun for damage.

Check if spring force and lift are set according to the welding parameter table in

the operating manual of the stud welding gun.

Refer here to the operating manual of your welding gun.

10.3 Checking the Automatic Stud Feeder

Always check the operating manual of your automatic stud feeder to see whether

it may be used with this stud welding unit.

This stud welding unit can only be used with the fully automatic stud feeder VBZ-3.

Refer here to the operating manual of your automatic stud feeder.

«
...
25
26
27
28
29
...
»

Summary of Contents for 92-10-1504B































































Reviews:

No comments