15
WE2107
A2087-1.3 en/de
HBM
5
Parameter menu and display functions
5.1
Calling the parameter menu
There are two ways to activate the parameter menu:
D
Press the
“G/N”
and
“>T<”
keys simultaneously
or
D
Press the hidden pushbutton
The difference is the access to the legal / scale adjustment parameters:
Pressing the hidden pushbutton gives access to the legal parameters of the
first menu level (”ScALE”, “AdJ” and “F_AdJ”), otherwise these parameters
are only displayed.
You are prevented from calling the parameter menu if input IN2 has been
activated accordingly.
5.2
Menu functions can be disabled / enabled
The parameter menu has so‐called access levels (0...4). This feature is used
to enable or disable user access to the parameters. Only those menu items
that are enabled are displayed.
Access to change parameters is defined in the “ScALE
³
ACCES” menu.
The lowest level is zero. The “ScALE
³
ACCES” menu is protected by the
hidden pushbutton.
ACCES parameter
Access levels
0
0 only
1
0 and 1
2
0 to 2
3
0 to 3
4
All
5.3
The main menu
To make things clearer, the parameters are grouped into several sub‐menus,
which can be called from the main menu. It is also possible to manually switch
off the device (see Operating Manual, Chapter 7, Operating Manual, Part 1)
and print out the parameters (but only if the printer interface is active). Certain
parameters are not accessible in every mode of device operation, or are
read‐only. To make adjustments for legal‐for‐trade devices, it is necessary to
actuate a hidden pushbutton, which is only accessible once the calibration
label has been removed.
