Saving data on the Data Recorder
68
A3169-8.0
HBM: public
CX22B / CX22B-W
10.2 Removing and inserting the CFast
memory card
Notice
Do not replace the CFast when data are being written to
it. If this is combined with a sudden loss of power, the
memory card or the device could be damaged, or
−
if
measurement data are being recorded
−
all the data of
the test could be lost. When operation is ongoing, the
memory card can be disabled under Windows. It is best
to switch off the CX22B‒W before replacing the CFast.
► Undo the retaining screw for the CFast. The screw
must not be removed, it should just be loosened.
► Swivel the cover plate upwards to expose the slot for
the CFast.
► Press on the memory card with your finger to remove
it.
► Hold the CFast with the top facing upwards and slide
it into the slot until the memory card engages. The
CFast must disappear completely inside the slot.
► Swivel the cover plate downwards and secure the
card.
► Tighten the retaining screw by hand.