Saving data on the Data Recorder
66
A3169-8.0
HBM: public
CX22B / CX22B-W
10
Saving data on the Data Recorder
10.1 Memory partitioning
The available memory in the CX22B‒W Data Recorder
allocated as follows:
S
16 GByte are used for the operating system and are
specifically protected against (unintentional) change
(partition C, EWF filter).
S
48 GByte are readily available for the application and,
optionally, for measured data (partition D).
C:\ Windows 8
Embedded
including
catman
EASY
D:\ Application and
measurered data
E:\ Measurement
data
Removable CFast card (in
scope of supply 8 Gbyte)
16 GB
48 GB
Internal SSD
Internal SSD
Fig. 10.1
Partitioning of the available memory
Important
All changes made in partition C: are only temporary, as
this partition is protected against change (EWF,
see Section 10.4). In the start screen, click on
Commit
changes and reboot
, to permanently save the new set
tings or the newly installed software. The CX22B‒W is
then rebooted, so you must set up the connection again
after the restart.