Bedienen des Datenrekorders
CX22B / CX22B-W
A3169-8.0
HBM: public
33
6.2
Bedienen über einen PC
In diesem Fall wird der CX22B‒W‐Datenrekorder über
Ethernet mit dem PC verbunden. Dabei gibt es abhängig
von Ihrer PC‐ bzw. Netzwerkkonfiguration verschiedene
Varianten, von denen die Vorgehensweise beim Her
stellen der Verbindung abhängt:
S
CX22B‒W und PC werden direkt über ein Ether
net‐Kabel verbunden.
S
Der CX22B‒W‐Datenrekorder wird mit einem Ether
net‐Netzwerk verbunden (in der Regel automatische
Zuweisung der Netzwerkkonfiguration über DHCP,
D
ynamic
H
ost
C
onfiguration
P
rotocol).
Eine ausführliche Beschreibung finden Sie in
Kapi
tel 6.2.2, Seite 40
S
Der CX22B‒W‐Datenrekorder wird über WLAN ver
bunden (ad-hoc an einen PC oder Hotspot-Integration
in ein lokales Netzwerk - LAN).
Wichtig
Warten Sie nach dem Einschalten des CX22B‒W ca.
1 Minute, bevor Sie eine Verbindung aufbauen, damit der
Bootvorgang vollständig abgeschlossen und das Modul
bereit ist. Andernfalls erhalten Sie evtl. eine Fehlermel
dung, dass das Gerät nicht gefunden werden konnte.
Um das Herstellen einer Verbindung bei unbekannten
Einstellungen des CX22B‒W zu erleichtern, können Sie
das HBM‐Programm
HBM Device Manager
verwenden,
welches Teil der Systemsoftware ist und als DVD dem
Paket beiliegt oder als Download zur Verfügung steht
(www.hbm.com -> Support -> Downloads).