Anschlüsse und Anzeigen
CX22B / CX22B-W
A3169-8.0
HBM: public
19
Der Datenrekorder kann auch über den Modulverbund
(FireWire) mit Spannung versorgt werden.
Wichtig
Im Datenrekorder ist eine Pufferbatterie (Typ CR2032
Lithium) integriert. Sie gewährleistet den Erhalt der Uhr
zeit und des Datums, wenn der Datenrekorder von der
Spannungsversorgung getrennt ist.Diese Batterie darf
nur vom HBM‐Servicepersonal gewechselt werden.
4.2
Masseverbindung und Erdung
Verlegen Sie Signal‐ und Datenleitungen getrennt von
stromführenden Starkstromleitungen. Ideal sind Kabel
kanäle aus Blech mit interner Trennwand.
Bei Potenzialunterschieden im oder zum angeschlos
senen Messsystem müssen Sie eine Potenzial‐Aus
gleichsleitung (PA) verlegen (Richtwert: hochflexible
Litze, Leitungsquerschnitt 10mm
2
).
4.3
Anbindung von QuantumX‐Modulen
Messmodule werden mit dem CX22B‒W‐Datenrekorder
im einfachsten Fall über FireWire oder aber über Ether
net verbunden.
FireWire bietet folgende Vorteile:
S
Spannungsversorgung, Zeitsynchronisation, Daten
kommunikation und Echtzeit in einem Kabel und da
mit geringer Aufwand und Kosten
S
Jedes Modul hat 2 FireWire‐Anschlüsse und damit
sind flexible Topologien machbar: Stern, Linie oder