39
QuantumX Data Recorder CX22‐W
A3169-1.0 en/de
HBM
11
System settings, update and restoration
11.1 Changing system settings (Settings)
Important
All changes in the Settings dialog are only permanently saved and active after
the next switch on if you click on
Commit changes and reboot
in the start
screen after making any changes.
The following settings can be changed:
•
Device name (
CX22‐W name
,
General
tab)
This name is displayed, e.g. in the network.
•
Password (
Remote access password
tab)
The password is required for registration (Log On).
•
Start catman
®
AP after switching on the CX22‐W (
Launch DAQ software
(catmanAP) at startup
,
General
tab)
Automatically starts catman
®
AP as soon as the system is operational.
See also Chapter 9 on Page 33.
•
The language version in catman
®
AP (
DAQ software language
,
General
tab)
Select
EN
for the English interface,
DE
for the German interface and
FR
for the French version of catman
®
AP.
In the start screen, click on
Settings
and go to the appropriate tab to change
the settings.
Important
Store the password safely after changing it. If you lose it you will need to
restore the system to obtain access to the CX22‐W again.
The
Info
tab contains information about the CX22 hardware and firmware.
Changes are not possible here.
11.2 System restoration (Recovery)
If you have made changes to the system leading to the system becoming
inoperable, you can restore the delivery condition of the system. Neither the
data saved to the CF card nor the partition D of the internal memory contain
