HBM QUANTUM X SCM-HV, Quick Start Manual

Page: 8 / 100

Safety instructions
6
A3615-4.0 HBM: public
SCM-HV
used must be disposed of separately and not with nor­
mal household garbage.
S
The SCM­HV is intended solely for use in conjunction
with a QuantumX module. If the SCM­HV is also inte­
grated into a system, it is the responsibility of the sys­
tem installer to keep the system safe.
Qualified personnel
Qualified persons means persons entrusted with the in­
stallation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
S
For measurements covered by the low voltage direc­
tive, the signal conditioner must only be connected by
a qualified electrician, or by someone with electrical
training under the supervision of a qualified electri­
cian. (A qualified electrician is someone whose techni­
cal training, know-how and experience, as well as
knowledge of the relevant requirements, allows them
to assess the work assigned to them and to recognize
potential risks, and who has been designated a quali­
fied electrician by the contractor).
Working safely
S
When unpacking the contents of the package, check
that everything is present. When it is unpacked, the
SCM­HV should be inspected for mechanical dam­
age. If damage has occurred during transit, the signal
conditioner must not be operated. Any shipping dam­
age caused by inadequate packaging is excluded
from the warranty.
S
Error messages should only be acknowledged once
the cause of the error is removed and no further dan­
ger exists.