HBM PX401, Operating Manual

Page: 179 / 552

Internal calculation channels
PMX
A4354-2.2 HBM: public
179
Default in0: Constant 0.0
a0, a1, a2, a3, a4: 0.0
b0, b1, b2, b3, b4:0.0
OneSet = true
Exception handling If the input is marked as invalid (Invalid Bit), then the output is
also marked as invalid.
The output value is still determined and output.
In the case of a range overrun, Not
­
a­Number is output and
the output is marked as not valid.
13.2.1.4 Taring
Function Rapid zero setting or taring, controlled via digital input.
Inputs - Input in0 , input with untared original measured value.
- Tare value (tareValue) , input with value, applied during
taring to the output.
Tare value = 0 equivalent to zero setting
.
- Trigger (level controlled): at level = high the output is set to
the tare value.
- Reset (level controlled): at level = high the zero
setting/taring is cancelled. Reset overloaded trigger
.
Outputs Tared value out0 = in0 ­ internal offset
Parameters none