HBM HLCM Series, Mounting Instructions

Page: 10 / 68

Mounting instructions
8
A1140-4.0 HBM: public
HLCM…
4 Mounting instructions
S
It should be ensured that the mounting / siting sur­
faces are clean, flat and level. Depending on the
installation circumstances, any levelling error can be
compensated for example by suitable wedges and
compensating plates (weld on) or by grinding away
the mounting surface.
Important
On no account the module plates must be grind off.
S
The foundation/base frame must be sufficiently stiff so
that no impermissible deformations (e.g. deflections)
occur on loading.
S
In order to keep the mounting free of straining forces,
the fastening holes on the base frame and the tank
joint must be sufficiently in alignment.
S
Uniform loading on the support points should be pro­
vided where possible. Correct adjustment of the
height on the supporting points must be ensured
(have compensating shims ready). This is especially
important for statically undefined supports.