Figure 6.2:
Board Verification window overview (Transmitter)
A
Test: Indicates the tests to be performed (depending on the selected
device)
B
Optional: Full Bandwidth tests
C
Optional: MIL standard test
D
Board: Shows information about the selected device
E
Start: To start the verification process
F
Save Results...: To save the verification test results
G
Pause: To pause or stop while testing
H
Close: To end the verification process
I
Set up CalStack...: To open the CalStack Setup window.
J
Test results: Shows the test results
CAUTION
If you have not already done so, set up the CalStack before starting a
calibration or verification to ensure that the ISOBE5600 Calibration and
Verification software knows which calibration standard(s) you are using.
ISOBE5600
84
I2716-4.0 en
