5.2.3
AC Calibration (depending on device)
CAUTION
Before performing the AC calibration, it is recommended to have access
to any necessary physical adjustments to AC gain. After AC calibration,
the device should be put together as it will be used for measurement.
When the DC Calibration test is finished, the calibration process continues with
the AC Calibration test:
1
Connect the testing fixture to the calibration standard(s) as displayed on
your screen.
Note
This should be the same setup as the DC calibration of the Transmitter
Figure 5.8:
Example of an ISOBE5600 Connection window
Note
The color of your cables may differ from the cables displayed on the
ISOBE5600 Connection window.
ISOBE5600
74
I2716-4.0 en
