![background image](http://html1.mh-extra.com/html/hb-therm/t25932-1/t25932-1_assembly-instructions_2111627001.webp)
Temperatur Control Technology
www.hb-therm.ch
M8107-EN 2020-01
1/4
2020-01
Page
Assembly Instructions M8107-EN
Spare part cooling valve 2 (O/ID T25932-X, T25933-X)
Purpose
Replacement of hydraulic parts cooling valve 2 (M 4)
Precondition
WARNING!
Danger for unauthorized persons!
Conversion work may only be carried out by
specialist staff who have been trained accordingly.
Therefore:
– Keep unauthorized persons away from the work
area.
NOTE!
Knowledge of the Instruction Manual is a
precondition for carrying out conversion work on
the unit.
Procedure
DANGER!
Danger to life caused by electric current!
Touching conductive parts causes a direct danger
to life.
Therefore:
– For all work on the electrical system, for
maintenance, cleaning or repair work,
disconnect from the mains or disconnect all
phases of the external power supply and secure
them against being switched on again. Check
unit is isolated from power supply.
WARNING!
Danger of crushing due to rolling away or
tipping
With an uneven floor or when the castors are not
locked, there is a danger that the unit tips over or
rolls away causing crushing.
Therefore:
– Only install the unit on an even floor.
– Ensure that the castors are locked.