HB-TP180/200
Checking Facility for Temperature Control Units
Structure and function
O8354-EN 2018-11
25
4.4 Work and danger zones
Working areas
The primary working area is located at the front of the
temperature control unit or the Panel-5 control module.
The secondary working area is located at the rear of the
temperature control unit.
Danger areas
Use the port on the back of the temperature control unit to
connect the checking facility. There is the danger of burning
and scalding at accessible hot surfaces. From a bursting hose,
hot steam or hot water can escape and cause burns and
scalds.
