Haztec 8-9100-U, Assembly Instructions, Page: 1 / 2

GLOBAL WARNING
Haztec International Ltd, Moorfield Estate Leeds LS19 7BN
T +44 (0)113 202 9115 F +44(0)113 2029158
E info@haztec.biz www.haztec.biz
8-9100-U Lightbar Speaker (Under-slung)
TECHNICAL SPECIFICATIONS
Output Power
50W
Cowl Dimensions 227mm(W)x100(D)x26mm(H)
Driver Dimensions 94mm diam x55 deep (max)
Working Temp Range
0 0
-40 C to +55 C
Output Impedance 4Ω
Assembly Instructions
Ÿ
Ensure that the base being used to mount the speaker assembly is flat and free from debris & dirt.
Ÿ
Using the cowl base plate as a template, drill out the holes as shown below in the extrusion/lightbar base (see fig 1)
a 1x21mm for main speaker driver output
b 2x6.5mm for cowl/driver plate mounting bolts
c 2x6.5mm for cowl fixing to base/extrusion
Drilling key
a
b
c
c
Front
Rear
a
b
c
Front
Rear
c
Ÿ
Ensure the 2 inserts are in place(see fig 2) The raised edge of the insert should face up as the lip on hole (a)
Ÿ
Place the cowl base plate under the base/extrusion and line up the holes previously drilled ensuring the fully flat side of
the base plate fits against the underside of the extrusion/lightbar base (see fig 3)
Ÿ
Place the rubber gasket on the upper side of the extrusion and then the metal driver mounting collar on top making
sure the countersunk screw holes are facing UP to the inside of the lightbar (see fig 4)
fig 1 fig 2
insert
fig 3
fig 4
Underside
of lightbar
Cowl base
plate
Insert
(raised)
Collar
(raised)
Front
Rear
Rear
Front
Topside
of lightbar
Driver
mounting
plate
Rubber
gasket
Allen head
bolt
insert
insert insert