Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: +44(0)113 202 9115
∙ [email protected] ∙ www.haztec.uk
4-3056-X
Directional Warning Light
M332.1.1
- 1 - October 2021
Thank you for purchasing this Haztec product. Before proceeding with installation, it is essential to
read and understand this instruction booklet.
▪
This product must be installed by persons competent in vehicle electrical installations
▪
Care should be taken to ensure that water ingress cannot occur through mounting or wiring
holes
▪
Regularly inspect the product to confirm correct operation
▪
DO NOT
stare directly into the light it produces as permanent damage to the eyes may
result
▪
Use only a mixture of soap and water to clean this product
▪
DO NOT
allow solvents; fuels; acetone-based cleaners etc. to come into contact with this
product
Basic Operating Specifications:
Supply voltage range:
10-30VDC
Maximum current draw:
1.28A @ 12VDC / 0.67 @ 24VDC
Operating temperature range:
-40
O
C ~ +65
O
C
LED Power:
4W per LED
Dimensions (mm):
130 (L) x 28.5 (H) x 13 (D)
Cable length:
300mm
Installation Notes
▪
Ensure that the mounting surface is completely flat. The lamp is
not
flexible, and will be
damaged if any attempt is made to mount on a curved surface
▪
Always use the fixing screws provided. If a different fixing screw must be used, it is
essential that the screw head fits comfortably in the screw-head recess on the lamp. If
the screw head is larger than the recess, then the lamp lens will be damaged during
installation
▪
DO NOT
over tighten mounting screws as this will cause damage to the assembly
▪
Ultra slim LED warning light
▪
6-LED
▪
UNECE R65 approved
▪
User selectable flash patterns
▪
Synchronise capable
▪
IP67 rated