Hazet 9036 N-1 Operating Instructions Manual Download Page 11

11

HAZET-WERK

 Hermann Zerver GmbH & Co. KG 

;

 Güldenwerther Bahnhofstraße 25 - 29 

 42857 Remscheid 

 GERMANY

[

 +49 (0) 21 91 / 7 92-0 

\

 +49 (0) 21 91 / 7 92-375 

^

 hazet.de 

]

[email protected]

1. General information

•  Please make sure that the user of this tool 

carefully reads these operating instructions 

and  fully  understands  all  information  given 

before it is used.

•  These operating instructions contain impor-

tant  information  that  is  necessary  for  the 

safe  and  trouble-free  operation  of  your 

HAZET tool.

•  For intended use of the tool, it is essential 

that  all  safety  instructions  and  other  infor-

mation  in  these  operating  instructions  is 

adhered to.

•  For  this  reason,  always  keep  these  opera-

ting instructions together with your HAZET 

tool.

•  This tool has been designed exclusively for 

specific  applications.  HAZET  emphasises 

that any modification to the tool and/or use 

in  a  way  that  does  not  correspond  to  its 

intended application is strictly forbidden.

•  HAZET  will  not  be  liable  for  any  injuries  or 

damages caused by improper or inappropri-

ate application which is not in accordance 

with regulations or a disregard of the safety 

instructions.

•  Furthermore, the general safety regulations 

and  regulations  for  the  prevention  of  acci-

dents  in  the  application  range  of  this  tool 

must be observed and respected.

2. Explanation of symbols

ATTENTION:

  

Pay  strict  attention  to  these 

symbols!

Read the operating instructions!

The owner is obliged to observe the 

operating instructions and instruct 

all users of this tool according to the 

operating instructions. 

NOTE!

This symbol indicates advice that is 

helpful when using the tool. 

WARNING!

 

 

This symbol indicates important  

specifications, dangerous conditions, 

safety risks and safety advice. 

CAUTION!

 

 

This symbol marks advice which 

if disregarded results in damage, 

malfunction and/or functional failure 

of the tool.

QUALIFIED PERSONNEL!

 

 

The tool may be used by qualified 

personnel only. Handling by non­

qualified people may lead to injuries 

to persons or damage to the tool or 

the workpiece.

1

 For your Information

Immer persönliche Schutzausrüstung tragen! 

Always wear personal protective equipment!

Summary of Contents for 9036 N-1





















Reviews: