GB
USA
13
Please lubricate the threaded spindle before each use!
3
Design and Function
Spindle TR 20 175mm , short with
adapter thread
Inside M10, M12, M14,
Spindle TR 20, 350mm long with
adapter thread
Inside M10, M12, M14,
Pressure nut TR20 with mount
(Weight of the set with case 31.08 kg)
3. Prior to Operation
• Always follow the instructions of the manufacturers of the vehicles and the manufacturers of the bearing
parts.
• The bearing/shaft seals must not being tilted before and during inserting.
• Only use lubricants which are approved by the manufacturers of the vehicles / bearings when inserting
the bearing/shaft seals.
• Before extracting or inserting make sure that every tool part is in its correct position, to avoid any damage
to the vehicle and bearing parts. Step discs and pressure sleeves must be inserted in numerical order.
For example step disc 4 to pressure sleeve with lettering 4 (fi g. 2)
fi g. 2
Summary of Contents for 4926-1/36
Page 15: ...15 Notizen Notes ...
