HazeBase Base Low Pro, User Manual

Page: 10 / 18

www.haze base .com
10
English
4.4 Operation via Analog
Press the ANALOG Button top left in the main menu or select SETTINGS to ANALOG button - > ANALOG to
enter the Analog menu .
The analog mode is divided into two modes:
1. DIRECT
This mode is for XLR Remote with input voltages between 1 and 5 V or 5 and 9V which can be selected via
the button DIRECT as a fixed Preset.
Press PRESET to 1-5V with + and - to select the 4th line the preset . 5-9V PRESET key to this set analogously.
The lower half of the rotary knob on the XLR-Remote is about 1 and 5V ; 5 and 9V the top
Half.
2. LATCHED
This mode is an on and off by brief voltage pulse. Press PRESET in 3rd line and adjust with + and - set in 4th
line to select values.
With ANALOG SAVE the settings will be stored. With BACK you going back to the main menu without saving.
If the analog output ( 0 to 10V ) of the
base•low•pro above 1V machine to be
controlled via the analog output . Condi-
tion is that no DMX and Ethernet is still
active.
If the latched mode on the base•low•pro is activated you must be disabled in the latched
mode. Switching to another mode is not possible.