Hayward Aqua Connect Installation Manual Download Page 1

Page: 1 / 16

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Changes or modifications not expressly approved by Hayward could void the

user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a resi-

dential installation. This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

— Consult the dealer or an experienced radio / TV technician for help.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The term “IC” before the certification / registration number only signifies that the

Industry Canada technical specifications were met.

Web-Based Pool Control Interface

Installation Manual

AQ-CO-HOMENET

092445 RevC

www.hayward-pool.com

620 Division St.

Elizabeth, NJ 07207

Aqua C

Aqua Connect

onnect

Home Network

Summary of Contents for Aqua Connect

















Search results

Summary of Contents for Aqua Connect

Reviews:

Brands by name

Popular brands

Hayward Aqua Connect, Installation Manual

Search results

Summary of Contents for Aqua Connect

Reviews:

Brands by name

Popular brands