background image

– GENERAL INFORMATION –

TECHNICAL DATA

This product is fitted with an E27 (EU) or an E26 
(US) bulb fitting. HAY recommends using this 
product with LED bulbs.

FITTING TYPE | E27 (EU) or E26 (US)
POWER (W) | 8-15 W
COLOUR TEMPERATURE | 3000K. Warm White.

HAY will not accept any responsibility for any 
accidents, injuries or damages that occur due to 
the use of incorrect bulbs.

ATTENTION

Ensure that the power supply to the circuit has 
clearly been turned OFF before installing the 
product. In some countries, electrical installation 
must be carried out by authorised electricians/
contractors; please check with your local 
authority for guidance.

The product must not be modified in any way. 
HAY accepts no responsibility for any products 
that have been modified or tampered with. The 
external flexible cable or cord of this luminaire 
cannot be replaced. If the cord is damaged, 
the luminaire should be destroyed. This lamp is 
designed for indoor use only.

CARE AND MAINTENANCE

The product can be cleaned with a soft damp 
cloth and mild detergent, or a dry microfibre 
cloth. Do not use alcohol or any other solvents 
to clean the product and avoid using abrasive or 
rough sponges. Ensure that the power supply has 
been turned OFF before cleaning the product.

Summary of Contents for COMMON LAMP BASE













Reviews: