42
Site Survey:
Press this button for the device to automatically scan for wireless networks.
After it scans, a list of wireless networks in the area will appear. Click “Setup” to
connect to this network.
ESSID:
After you click setup, the name of the wireless network you wish to connect to
will appear here. You can also manually enter the name or click on “Site Survey”
for the device to scan for wireless networks.
Authentication
After you click setup, the security type of the wireless network you wish to
connect to will appear here. Type in your key to connect.
Click Next
3-4-4 Repeater AP Setup
This allows you to create a repeater AP and set SSID to your wireless network.
This page is used to define the parameters for the wireless LAN clients
ESSID:
This is the wireless broadcast name. By default, it is ‘Hawking_HPOW5CM’ but
you can change it to whatever you want.
Authentication:
Choose your type of security (Hawking recommends AUTO (WPA or WPA-2PSK))
Summary of Contents for HPOW5CM
Page 21: ...20...
Page 50: ...49 Settings can be modified via the VLAN setup after configuration is complete See section 4 3...
Page 126: ...125...
