Quick Installation Guide
Model No. HNC3W
Hawkvision
TM
Universal Smart
Camera
Package Contents
• 1x HNC3W HawkVision Universal Smart Cam
• 1x Power Adapter 5V/1.2A
• 1x Camera Stand/Mounting Kit
• 1x Three foot Ethernet Cable
• 1x Setup CD-ROM
• 1x Quick Installation Guide (QIG)
System Requirements
• Windows XP or later with an available CD/DVD-Rom Drive
(only required for initial setup)
• A LAN Port on your network (only required for initial setup)
• Wireless 802.11b/g/n network (only if you wish to connect
to your network wirelessly.)
• Power Outlet
• Computer Platform for viewing: Windows XP or later, Mac
OS 10.4 or later
CPU: Intel Pentium III 800MHz or above
RAM: 512MB
Resolution: 800x600 or above
Interface: Internet Explorer 6.0+, Firefox 2.0+, Safari
2.0+, or Chrome
• SmartPhone/Tablet Interface (optional): iOS or Android
EagleSense App
IR (Infrared) Lights
Turns on when camera is in Low Light/Night Vision Mode
Internal Microphone
Allows the camera to receive sound/voice
Camera Lens
WPS (Wi-Fi Protected Setup) Button
Press and release to initiate easy wireless connection with WPS devices
Power Plug (5V/1.2A)
Plug the provided AC adapter to power on the device.
Camera Mount
Hole to connect to the camera stand.
LAN Port
Used to connect the camera via Ethernet cable.
Installing the Camera Stand
The camera comes with a camera stand, which uses a swivel ball screw head
to lock to the camera’s back mount. When the camera stand is attached, you
can place the camera anywhere by mounting the camera through the three
screw holes on the base of the camera stand.
Connecting the Camera to the Network
Use the provided Ethernet cable to connect the camera to your local area network
(LAN). Connect the AC power adapter to the camera and it will be powered on
automatically. You can verify the status from the Power LED on the front panel of
the camera. Once connected, the LINK LED will also flash a green light,
indicating that the camera is ready for use.
PRE-CONFIGURATION
Hardware Setup
www.hawkingtech.com
Technical Support: 1.888.202.3344 E-mail: [email protected]
PRODUCT DESCRIPTION
Power
LED is on, when the power adapter is connected and plugged into an outlet
Link LED
Indicates the camera’s network connectivity with flashing green light
Reset Button
Press and release to reboot the camera. Press and hold for more than
5 seconds to perform a factory reset.
Ethernet
DC 5V
WPS
Reset
