Page 28
Sub-section - 4.05
ABNORMAL PROCEDURES
FAA Approved
Original Issue: Feb 28, 2006
Hawker 850XP Pro Line 21 Airplane Flight Manual
LANDING BY USE OF TRIM SYSTEM
Perform Normal APPROACH and LANDING CHECKS -
NORMAL PROCEDURES - Sub-section 4.10.
NOTES:
1. Steep turns should be avoided.
2. Attempt to utilize a runway that will result in as small a crosswind component as
possible.
FLAPS ........................................................................15
°
Landing Gear .............................................................Down
Airspeed .....................................................................160 KIAS
If Rudder is Unusable
FLAPS ........................................................................45
°
Airspeed .....................................................................V
REF
+10 KIAS
Yaw Damper ...............................................................Disengage prior to touchdown
NOTE: Landing Distance will increase by approximately 16% above the landing distance
with FLAPS 45
°.
If Elevator is Unusable
Use pitch trim to control the airplane longitudinally
FLAPS ........................................................................45
°
Airspeed .....................................................................V
REF
+10 KIAS
Descent rate ...............................................................Control with engine thrust
Approach ....................................................................Fly a flat, straight-in approach
Thrust levers...............................................................Slowly reduce to idle at touchdown
Touch down using pitch trim to produce the minimum flare required.
NOTE: Landing distance will increase by approximately 16% above the landing distance
with FLAPS 45
°.
Continued Next Page
For Training Purposes Only