Hawke FRONTIER LRF, Manual

Page: 5 / 38

5
English / USA
FOCUSING YOUR
BINOCULAR
1. Look through the binoculars at a blank, flatly lit,
bright area such as a wall or open sky.
2. Quick press the POWER button.
3. Rotate the (Right) OLED focus adjuster until the
OLED display appears sharp.
4. Look through the binoculars at an image such
as a building or tree.
5. Cover the left front lens with your hand and rotate
the focusing wheel until the image in the right
eyepiece appears sharp.
6. Now cover the right front lens with your hand
and rotate the (Left) diopter adjuster until the
image is sharp.
7. The binoculars have now been adjusted to your eyes.
LRF OPERATION
Quick press the POWER button. When turned on, the
range finder will start in the same mode it was in when
last used. To cycle through the modes simply press the
MODE button until you come to the setting you desire.
Quick press the POWER button to range find the target
you are aiming at. The diagonal lines around the center
aimpoint flash to confirm rangefinding.
The laser range finder will automatically turn off when
not used for 15 seconds.
STANDARD MODE
Standard mode measures the straight line distance to the
target you are aiming at. It is measured to the nearest
tenth of a yard/metre.
When there is nothing displayed in the targeting modes
area of the display (to the right or underneath the
distance), you are in Standard mode.