HAWEKA RPV1300, Operating Instructions Manual

Page: 28 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
28
Control measurement
After the measurement the program automatically
changes to the result with the circle diagram.
The individual results are displayed under the heading
Evaluation (
Fig. 62
).
•
Click on “ Next ”.
This completes measuring of the individual wheel and
the program shows the overview page for the entire
vehicle (
Fig. 63
)
•
Select a different wheel to carry out another
measurement.
•
For new measurements repeat the steps from 7.3
Assigning the laser sensors
9 Show log
Click the “
Show log ” button on the start page
to reopen a saved measurement session at
any time.
(Fig. 64)
(Fig. 64)
(Fig. 62)
(Fig. 63)
Control measurement
completed