HAWEKA RPV1300, Operating Instructions Manual

Page: 15 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
15
5.1.3 Interface for laser sensor:
After successful installation, new virtual COM interfaces are added to the system, depending on
the number of connected laser sensors.
The entry with the new COM interface can be verified in Windows device manager.
Each laser sensor requires one free USB port.
The supplied USB hub (
Fig. 12
) is connected to a
USB port on the PC, allowing connection of the
individual laser sensors.
The program can control up to three laser sensors.
(Fig. 13)
When the program has detected a laser sensor it will
display the corresponding serial number.
Description of symbols:
Display is grey. No laser sensor detected.
Display is green. Laser sensor was connected and
detected.
Display is red: Flash test on the laser sensor.
(Fig. 13)
(Fig. 12)