HAWEKA RPV1300, Operating Instructions Manual

Page: 13 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
13
5 The RPV1300 Program
We have taken great care to ensure that the entire program is straightforward and clear so that
the user can monitor and operate the device at all times with ease.
You will learn how to use this program to determine the rim and tyre geometry of a vehicle
wheel in a very short time.
In just a few steps, help texts and graphical illustrations guide you through the different parts of
the program and provide sufficient information about the program at all times.
Before you begin with your first measurement, however. the most important program
parameters have to be set up for individual use.
5.1 Setting up the software
•
Start the program.
Click on the RPV1300 icon on the desktop or in Windows select:
START - ALL PROGRAMS - HAWEKA – RPV1300 / RPV1300.
After program start select the option “
Settings ” for the first basic setting.
The “ Start measurement ” button only becomes active when at least 2 laser sensors are
connected to the PC.
(Fig. 9)